Audio Visual Installation Driffield

Audio Visual Installation Driffield – we have just completed an Audio Visual Installation in Driffield Methodist Church with the install of a Bose Sound System, Ampetronic Hearing Loop System and a Kramer HDMI over CAT6 distribution system in the main worship area.

We were contracted to install a new audio visual installation within a methodist church that was been built from scratch so for the sound system installation we opted to install four Bose 402 speakers in white, two down either side of the main worship area. For the sound equipment installation we installed a QSC stereo amplifier in the control cupboard with the facility to plug the Allen & Heath QU16 digital mixer into the system via a XLR input panel installed on the outside wall.

We have re-used the customers three Sennheiser radio microphone systems which are connected to the sound system via the XLR input wall panels on the outside wall.

For the AV installation we have installed two Iiyama 86″ commercial screens either side of the stage area which are connected to a Kramer HDMI over CAT6 distribution system which consists of a Kramer HDMI Switcher and 1 in 4 out Distribution amplifier connected to three HDMI over CAT6 receivers.

At the stage area we have installed a Kramer Active HDMI input plate so that they can plug a laptop in on the stage along with a Kramer Active HDMI output plate which is connected to a Samsung 32″ TV screen which is been used as a preview monitor.

For the hearing loop installation we have installed two loops under the wooden floor using flat copper tape which covers the whole of the hall and then connected to an Ampetronic dual hearing loop amplifier.

In the small meeting room within the church we have installed an Ampetronic hearing loop system which consists of a flat copper tape installed under the wooden flooring connected to an Ampetronic hearing loop amplifier and connected to this are two Audio Technica AT875 shotgun microphones which are installed on the ceiling. We have a new Epson projector which is projecting onto the main white wall and connected via a Kramer active HDMI over CAT6 wall plate to a HDMI over CAT6 receiver. For the audio system installation we have re-used the customers existing InterM amplifier and existing column speakers.